Hello everyone, I hope all is well out there. I have been so slammed with many new great things going on that I feel I have not shared as much as I should have here. So let me get right to it.

I know I have made mention of the WS heater upgrade but dont think I have nailed anything down as for when what and how all that so will try and do my best to do that now.

I have a bunch of new units turned, new heaters installed, 24 hour bench time done and am buttoning up at the moment. New heaters have a 40% increased performance output providing a wider range of temps across the entire scale as well as an extra 100F at top end max temp. I strongly recommend not running the units at max for extended periods of time, there is just no need for it. Every unit has had a 24 hour bench time at max temp to ensure quality performance and stability. I wanted to give the WS a little more pedal to the floor for those that feel it just needed a little more hence the 40% its just enough to get there without getting ignorant and causing problems. I dont recommend running it at max temp for extended periods of time cause there is no need for it. The heater will react and adjust to change quickly. If you have to do what you do at max go for it then roll it back. I say this to prolong the units lifespan and performance. Its like running a sports car with the pedal to floor the entire time, its not a good idea. Below is the temperature range scale

[IMG] 

I suggest starting slow and low on the temp control to get to where you feel comfortable then adjust accordingly as needed.

I am working to make them available either tuesday but maybe wednesday. I have several species in this batch, a couple of one maybe a few of another. Burls and swirls domestics and exotics as well as a Honduras Rosewood Burl. I had no idea when I began turning it that it would be this slammed with burl and turn out to be such a masterpiece when done.

[IMG] 

I have also gotten these really nice well made heavy glass bubblers that accept a 14mm male. Its two hole bubbler with bottom intake for maximum flavor. I really like the weight and feel of it in hand. The 14mm male seats snug and very secure in the female connection so no need to worry. I found it to perform really well and feel you will also. Each bubbler comes with its own wood stand to keep it safe and upright out of harms way. They are available at my site.
[IMG] 
I am also working on a WS/DV workstation I am calling it. its bout 5x7 and will be available in 3 different species very soon. Has a magnet on either side of the center recess to keep your stem & cap in place. has an outer recess at either end to keep your material separated. Will also have a debowler spike in the center for easy ABV removal.

[IMG]

@bizwaxzion Am glad to hear you are still rocking it and appreciate the update. I hope you do so for a long time to come. Wish you well and all the best.

I am probably forgetting something but figure you all will have great questions and I will do my best to get back and answer up. I wish you all a great start to the week and all the best ahead.

Hello everyone, I hope all is well out there. I have been so slammed with many new great things going on that I feel I have not shared as much as I should have here. So let me get right to it.

I know I have made mention of the WS heater upgrade but dont think I have nailed anything down as for when what and how all that so will try and do my best to do that now.

I have a bunch of new units turned, new heaters installed, 24 hour bench time done and am buttoning up at the moment. New heaters have a 40% increased performance output providing a wider range of temps across the entire scale as well as an extra 100F at top end max temp. I strongly recommend not running the units at max for extended periods of time, there is just no need for it. Every unit has had a 24 hour bench time at max temp to ensure quality performance and stability. I wanted to give the WS a little more pedal to the floor for those that feel it just needed a little more hence the 40% its just enough to get there without getting ignorant and causing problems. I dont recommend running it at max temp for extended periods of time cause there is no need for it. The heater will react and adjust to change quickly. If you have to do what you do at max go for it then roll it back. I say this to prolong the units lifespan and performance. Its like running a sports car with the pedal to floor the entire time, its not a good idea.

I suggest starting slow and low on the temp control to get to where you feel comfortable then adjust accordingly as needed.

I am working to make them available either tuesday but maybe wednesday. I have several species in this batch, a couple of one maybe a few of another. Burls and swirls domestics and exotics as well as a Honduras Rosewood Burl. I had no idea when I began turning it that it would be this slammed with burl and turn out to be such a masterpiece when done.

I have also gotten these really nice well made heavy glass bubblers that accept a 14mm male. Its two hole bubbler with bottom intake for maximum flavor. I really like the weight and feel of it in hand. The 14mm male seats snug and very secure in the female connection so no need to worry. I found it to perform really well and feel you will also. Each bubbler comes with its own wood stand to keep it safe and upright out of harms way. They are available at my site.

I am also working on a WS/DV workstation I am calling it. its bout 5x7 and will be available in 3 different species very soon. Has a magnet on either side of the center recess to keep your stem & cap in place. has an outer recess at either end to keep your material separated. Will also have a debowler spike in the center for easy ABV removal.

I am also working on a WS/DV workstation I am calling it. its bout 5x7 and will be available in 3 different species very soon. Has a magnet on either side of the center recess to keep your stem & cap in place. has an outer recess at either end to keep your material separated. Will also have a debowler spike in the center for easy ABV removal.

Am excited to hear from you all who grab one of these new units and look forward to your feedback.

Upgrades, new species, new glass, raffle/fundraiser alot of fun to come 9-19-19 - Ed's TnT
Good things, good times, good intentions, lets make the most of it all!...
Updates & Info 10-20-19 - Ed's TnT
Love what I am hearing from new users with upgraded heater core....
Ed
Woot, woot, wood
read more ⟶
Leave a comment